$91
Specification:
Item Type: GPS Speedometer
Material: Stainless Steel 316L Bezel + Anti-Fog Glass
Color: Black Dial Silver Frame
Voltage: Long-Term Operating Voltage: 9-32V, Maximum Up to: 36V (≤ 1 Min)
Diameter: Approx. 85mm / 3.3in
Operating Voltage: 9-32VDC
Operating Current: ≤150mA
Operating Temperature: -30-+75℃
Storage Temperature: -40-+85℃
Multifunction Instruction:
Range of Tacho:0-9999 Rpm
Range of Speed:0-999 Km/H, Mph, Knots
Range of Water Temp: 40-120℃ (104-248℉)
Range of Fuel: 0-100%
Range of Pressure: 0-5bar / 0-10bar, 0-100psi / 0-150psi
Range of Odo: 0-99999.9 Km, Miles, Knots
Range of Hours: 0-99999.9 Hours
Range of Trip: 0-999.9 Km/H, Mph,Knots
Range of Volt: 9-32V
How to Use: Install the instrument on the instrument panel and fix it, and then turn on the power
Connection:
1. Red-+9-32VDC
2. Green-Tachometer Signa
3. Orange--Fuel Signal
4. Black-Ground (-)
5. Purple-Temp Signal
6. Gray-Pressure Signal
Installation:
1. Open a hole with a diameter of 85mm on the panel (your cabin panel and instrument panel), insert the instrument into the hole, the panel corresponding to the instrument panel is marked with a boss, and make a small notch at this position, To ensure that there is at least 85mm (3-3/8in) instrument panel on the back of the instrument
2. After installing the instrument into the panel, screw down with the fixing ring
3. Connect the wires, the instrument shell is directly connected to the 12 / 24V power supply
4. Insert the wire harness and fix it firmly on the table