Samurai 2K Polyurethane Spray Paint for Marine - 11.3 Ounce UV R Paint Primer

This fits yournbsp;.

Make sure this fits by entering your model number.
✅ [Premium boat spray] The most amazing coating innovation that combines both hardener and paint solution in one aerosol can system. It keeps your boat body protected!
✅ [Durable and protective paint] Samurai’s boat spray gives a protects the surface against abrasion, scratches, the weather and fading. Chemically stable enough to endure UV rays as well.
✅ [Easy to use] This boat spray paint contains 2 components in a single can, making it a hassle free and user friendly alternative to the old traditional air compressor method. It hits hard-to-reach areas, lays on smoothly and has a fine finish that looks excellent.
✅ [Good coverage] This boat coating contours to the exact shape and has a delicate finish that looks great compared to other similar products. This boat spray applies smoothly and provides great coverage. They provide better overall coverage per can and allow for more direct control during application.
✅ [Works like a charm] Sprays on thickly, fast and neatly. The finish on the surface of the area applied to is uniform. In 1(one) of our truck bed liner paint, you get enough to cover surface area about 10 to 12 ft² with 2 coats.

|||

Product Description

Samurai 2-parts spray paint system is a state of the art coating innovation mixing 2 chemical components in one aerosol can combine both hardener and paint solution when needed, making it hassle free and user friendly that conveniently substitutes against 1-Part paint.

Two-component paint (also referred to as 2k paints or 2-Parts paint) are the paints in which a chemical reaction results in paint hardening. Two-component paints consist of a base paint and a hardener. These two components mixed vigorously provides a much stronger substrate less susceptible to damage from chemical, weather, abrasion or UV rays.

Benefits 2-Parts Polyurethane Paint over 1-Part paint

Better UV protection: 2-Parts Polyurethane for UV test 1,000 hours vs 1-Part 300 hours

No Primer need but much better with 2K Epoxy Primer

2-Part Epoxy Primer + 2-Part Polyurethane : UV test 2,000 hours vs 1-Part 400 hours
2-Part Epoxy Primer + 2-Part Polyurethane : Salt spray test 1,500 hours vs 1-Part 300 hours

(Above technical tests subject to terms amp; condition, in house lab-test procedure)


Step 1 Place red cap to 180° on floor	Step 2 Hit can bottom with a fist	Step 3 Shake can well for 5 minutes	Step 4 Start to spray


	2K Polyurethane (PU) Paint	2K Epoxy Primer	2K Polyurethane (PU) Granular Textured Paint	2K Epoxy Granular Textured Primer	2K Non-Isocyanate (NISO) Paint	2K High Heat Paint
Rust preventative, scratch and high impact resistance	Greater than 1-part paint	Greater than 1-part paint	Greater than 1-part paint	Greater than 1-part paint	Greater than 1-part paint	Greater than 1-part paint
Weather and fade resistance	Greater than 1-part paint	n/a	Greater than 1-part paint	n/a	Greater than 1-part paint	Greater than 1-part paint
Adhesion	Great	Greater than 1-part paint	Great	Greater than 1-part paint	Great	Great
Coverage with 2 coats	10-12 sq. ft.	17-20 sq. ft.	10-12 sq. ft.	17-20 sq. ft.	10-12 sq. ft.	10-12 sq. ft.
Dry to touch (environment temperature at 77°F)	30 minutes	30 minutes	30 minutes	30 minutes	20 minutes	30 minutes
Dry to handle (environment temperature at 77°F)	1 hour	1 hour	1 hour	1 hour	1 day	1 hour
Full cure (environment temperature at 77°F)	7 days	7 days	7 days	7 days	7 days	1 hour
Pot life (environment temperature at 77°F)	4 hours	8 hours	4 hours	8 hours	24 hours	n/a
Isocyanate free		✓		✓	✓	✓
Non-skid textured finish			✓