$4
Where to use:
Mirror / Board/ Glass /Ceramic Tile / Metal Surface / Plastic / Non-paint walls / Other hard flat surface. (Please pay attention that there are limits on painted walls(wall paper),It may damage the wall if the paint wall adhesion is poor.)
How to install:
1.Clean the surface from oil/dust/water. Do keep dry before put the sticky suction cup on.
2.Peel off the protective film from the sticky pad and place it onto the specified location(desired spot).
3. Press the sticker base to exhaust the internal air.
4.Assemble the connector and soap box..
How to remove:
Use the hair dryer heating the sticker base, then press and hold the prominent position of the basic to remove it slowly.
Features:
- Installs in just seconds by placing it on the surface
- Grips to any smooth surface in seconds
- No drilling and no fixing required
- Will not damage walls
Wide application:
Compared to other suction soap dish, This sticky sution cup can be applied on more surfaces even if the surface is a little bit pitted or rough.
It Can be applied to surface like wood, glass, tile, stainless and steel metal ornament, plastic article etc.
Waterproof and oilproof with temperature resistance No matter if the surface is wetted or poured with oil, or if it is in hot summer or in cold winter, the sticker of our soap dish won't be distorted as many other plastic sticker does and will stay strongly and stably as the same.
NOTE
1．Please do not hang heavy products on this product, so as to avoid unnecessary losses
2．Please do not let the product for a long time by direct sunlight, so as not to reduce the product life cycle
3．Before use, please carefully wipe the wall.
Package includes: 1 soap dish